Applicable Industries:  Manufacturing Plant

Place of Origin:  China

Brand Name:  EP

Gearing Arrangement:  Planetary

Output Torque:  OEM

Input Speed:  OEM

Output Speed:  OEM

Product Name:  Gearbox

Certification:  ISO 9001:2008/TS16949

Warranty:  2 Years

PTO Tractor Gearboxes

The PTO gearbox series are used mainly to connect hydraulic pumps to agricultural tractors’ power take-offs. PTO output, standardized at either 540 or 1,000 rpm, is, in this way, increased to optimum operating speeds for the hydraulic pumps. RD series of gearboxes are used to reduce hydraulic motor speed.
ML and B series gearboxes connect hydraulic pumps to low-speed tractor power take-off. The standard power take-off speed of 540 rpm is increased by the gearbox ratio to optimal speed conditions required for the pump. Different inputs are accepted because the output speeds don’t go over 3000 rpm.

Hydraulic PTO Driven Gearbox for Tractor

The Gearboxes are designed for connecting gear pumps to the farm tractor PTO gearboxes. The output speed of power take-offs is 540rpm which can be compared with the proper running speeds of hydraulic pumps. Different input running speeds can also be suitable, provided that the gearbox output speed does not exceed 3000 rpm.

Group 2 Type 60001 Pto Speed Increaser for Tractor

Tractor gearbox: 60001-6
The gearbox is designed to connect the gear pump to the farm tractor power take-off (PTO). The output speed of the PTO is 540rpm, which is comparable to the normal operating speed of a hydraulic pump. Different input operating speeds may also be applicable, provided the PTO gearbox output speed does not exceed 3000 rpm.
Gears

Made in Steel UNI 18 PCR M03.Stub teeth guarantee very high resistance and run very quietly.
Shafts

Made in steel UNI 16 CRN4.They are coupled with splined gears and are designed to stand the torque values stated in the catalog.
Lubrication
SAE 90 gear oil must be placed in the PTO transmission prior to use and the oil should be changed after the first 60-80 hours, then every 12 months or 1500 hours, whichever comes first.
Maintenance
Please check the oil level via the special oil window every 50 hours. Working temperatures should not exceed 120 degrees Celcius under continuos duty cycle.