New technology of gear batch processing (for reference)

The quality of gear processing products needs more and more, and the noise of speed change needs less and less.To achieve the multiple intentions of product quality and noise, it is necessary to adopt better precision gear processing, to promote the gear tooth direction and tooth profile that are quite difficult, and the intention is to minimize the error of the variable speed transmission.

This means that in a period of time in the future, grinding will still be an important method for mass production of gears, and the production process of gear grinding will be more commonly used.But be carefulGear processingUnit cost.

So far, the benefits of low-cost and effective shaving have been outstanding.When grinding is successfully completed in gear finishing, gear shaving will be replaced by it in large numbers.

In other words, no matter which gear processing method you choose, you need to pay more attention to the specific conditions of use.

Considering that gear hobbing has now undergone considerable development, it is very likely that the high precision obtained after gear hobbing will no longer require gear shaving.

The further development of gear sintering technology has also made a relatively large contribution to gear production, but this method is now in its infancy, and it is difficult to correctly calculate the development trend.

As mentioned above, although the development of gear processing technology has changed, but the unit production cost of gears will not change.

In the mass production line, the adjustment of the gear processing structure should be guided by these parameters.The development of new technologies and processes has greatly benefited the improvement of product quality and accuracy.

With the refinement of gear commodity technology, the requirements for these two core factors are becoming more and more stringent.Although it is very difficult to consider such high needs, you must also demand high standards.It’s just that it’s not enough to base itself on high-tech indicators. What you need to pay more attention to is to achieve high-quality and low-cost benchmarks. Otherwise, even the best gears with new technologies, new processes and new functions will not be loved by the market. Will not continue to improve fundamentally.

In industries with high technological content, the trends of process precision and reasonable prices need to coexist. EP-precision gear processing, professional quality assurance, welcome to buy, if you have technical questions or related needs, you can click the consultation window on the right side of the website for free consultation!