Gear injection molding processing principle and 5 characteristics of injection gear

The principle of gear injection molding processing and the 5 characteristics of injection gear are described as follows, for reference and understanding.

Gear injection molding processing principle:

The thermoplastic is put into the barrel of the injection molding machine, heated and plasticized into a molten state, and injected into the mold cavity, cooled and solidified, and then the plastic part is taken out of the mold. This process is called injection molding.Injection gear is processed by injection molding methodgear.

Injection molding, also known as injection molding, is a method of processing small modulus gears that has been developed and applied rapidly in recent years.

5 major characteristics of injection gears:

1. The accuracy of the injection gear is largely determined by the accuracy of the mold and the performance of the plastic.

2. It has good chemical stability and can resist the erosion of acids, alkalis and organic solvents.

3. Good wear resistance and self-lubrication, stable transmission and no noise.

4. Good electrical insulation and poor thermal diffusion.

5. Due to the low density of plastics, plastic gears can reduce product weight.