Gear processing methods in 2 categories: related instructions for cutting processing and non-cutting processing

There are two types of gear processing methods: the relevant instructions for cutting and non-cutting are as follows, for reference.

There are many methods of gear tooth profile processing, which can be divided into cutting processing and non-cutting processing according to whether there is cutting in the processing.

1. There is cutting processing:

The cutting of tooth profile has the advantage of high machining accuracy, and it is the main method of gear tooth profile processing at present.

Specific methods include gear hobbing, gear shaping, gear grinding, gear planing, gear shaving, gear milling, gear pulling, punching, polishing (polishing) gear, honing, etc.

2. No cutting processing:

It has the advantages of high production efficiency, low material consumption and low cost, which are the advantages of non-cutting processing, including hot rolling, cold rolling gears, precision forging gears and new technology of powder metallurgy.

Due to its low processing accuracy, unstable process, and difficulty in adopting in small batch production, its use is limited.

The above isGear processingRelevant descriptions of 2 major categories of methods, including but not limited to, welcome to add if there are any deficiencies.