4 requirements for gear machining accuracy (for reference)

The 4 requirements for gear machining accuracy are as follows, for reference.

1. Work stability:

It is required that in each revolution of the gear, the range of multiple repeated changes in the angle of rotation error cannot exceed a certain limit.

2. Motion accuracy:

It is required that in each revolution of the gear, the maximum value of the angle error cannot exceed a certain limit.

3. Tooth side clearance:

A pair of meshing teeth should leave a certain gap between the non-working tooth surfaces.

4. Contact accuracy:

The tooth surface is required to have a certain contact area when the gear is meshed.

The above is the relevant description of the gear processing accuracy requirements, including but not limited to, if there are any deficiencies, please add them. Gear CompanyFree consultation.